Call (702) 990-1680
There are 0 item(s) in your cart
Subtotal: $0.00

Slide For Microscope

Product Highlights

microscope slide and cover glass dimension is 76*26mm,1″*3″mm and 25*75mm Thickness is 1.0mm,1.1mm Packing is 50pcs/box,72pcs/box


Slide for microscope

Code Description
7101/7101F ground edges; 90°/45°
7102 cut edges; 90°
7103 ground edges; single concave; 45°
7104 ground edges; double concavees; 45°
7105/7105F ground edges ;single frosted end; 90°/45°
7105-1 cut edges; single frosted end; 90°
7107/7107F ground edges; double frosted ends; 90°/45°
7107-1 cut edges; twin frosted ends
7109 stand color frsoted;

whtie,orange,green,pink,blue,yellow; ground edges ; 90°/45°

Dimension Thickness Packing
76*26mm,1″*3″mm,25*75mm 1.0mm,1.1mm 50pcs/box,72pcs/box


Cleaning method of new cover glass and new slide

The cleaning of cover glass and slide on the market is relatively simple, you can soak in 2% sulfuric acid concentration (95% concentration 100 copies signed up for 2 copies of dilute hydrochloric acid) for a few hours, and then wash in the water flow, let the water drop flow dry, immersed in 95% alcohol storage reserved.

Methods for cleaning old cover slides and slides that have been used

(1) Collect sliced specimens that do not need to be preserved and take a boiling bath in Fanzhu water for 5-10min.

(2) wash the residual shellac batter in boiling water.

(3) after rinsing with clean water, let the water drain dry.

(4) Immerse in lotion for about 30min.

(5) Rinse with pure water after clean water, and let the upper drop flow dry.

(6) Immerse in 95% alcohol and store for reserve.

When applying, remove the cover glass and the slide from the alcohol, and clean both sides of the loading sheet with the cleaning sand cloth. Be careful when cleaning the cover glass, and the strength should be balanced to prevent rupture.


There are no reviews yet.

Be the first to review “Slide For Microscope”

Your email address will not be published. Required fields are marked *